Refurbished Stereo
Description
The McIntosh MC2505 is a solid-state power amplifier with a maximum power output of 100 watts RMS continuous, 50 watts per channel operating simultaneously, into 4 ohm, 8 ohm, or 16 ohm loads.
Harmonic distortion is less than 0.25% at rated power output from 20Hz to 20,000Hz.
Frequency range at rated output both channels; +0, 0.025dB, 20Hz through 20,000Hz.
Specifications
Power output: 50 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.25%
Damping factor: 10
Input sensitivity: 0.5V
Signal-to-noise ratio: 90dB
Speaker load impedance: 4Ω to 16Ω
One Year Warranty
LED Lights, New Glass, Recap, Alignment, Serviced.
$3995.00
Pioneer SX-850

Specifications
Tuning range: FM, MW
Power output: 65 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 50kHz
Total harmonic distortion: 0.1%
Speaker load impedance: 4Ω (minimum)
Semiconductors: 3 x FET, 3 x IC, 56 x transistors, 36 x diodes
Dimensions: 526.6 x 173 x 411.5mm
Weight: 19.1kg
Year: 1976
90 Day Warranty
$995.00
Pioneer SA-9900

Description
The SA-9900 is a top of the line stereo integrated amplifier with state-of-the-art technology and advanced features.
Differential amplifier circuits are employed in the equaliser, tone control and power amplifier sections.
Each amplifier section is supplied by a balanced power supply system that assures excellent DC balance and stability, while nearly eliminating switching noise during control operation.
Specifications
Power output: 110 watts per channel into 8Ω (stereo)
Frequency response: 7Hz to 40kHz
Total harmonic distortion: 0.05%
Damping factor: 30
Input sensitivity: 6mV (mic), 2.5mV (MM), 150mV (line)
Signal to noise ratio: 65dB (mic), 70dB (MM), 95dB (line)
Output: 150mV (line), 2V (Pre out)
Speaker load impedance: 4Ω to 16Ω
Weight: 20kg
Accessories: hex wrench
Year: 1976
$1495.00
B&K Components AVR202

Description
The AVR202 series 200 receiver processes Dolby Pro Logic, Dolby Digital and DTS.
Specifications
Tuning range: FM, MW
Power output: 105 watts per channel into 8Ω (stereo)
Frequency response: 5Hz to 20kHz
Total harmonic distortion: 0.09%
Damping factor: 150
Input sensitivity: 63mV (line)
Signal to noise ratio: 89dB (line)
Digital inputs: coaxial, optical
Video Connections: composite, SVHS
Dimensions: 17 x 17 x 6.25 inches
Weight: 55lbs
Year: 1998
90 Day Warranty
$495.00
Lexicon RV-5

Specifications
Tuning range: FM, MW
Power output: 85 watts per channel into 8Ω (stereo)
Surround output: 85W (front), 85W (center), 85W (rear)
Frequency response: 10Hz to 40kHz
Total harmonic distortion: 0.07%
Signal to noise ratio: 95dB (line)
Output: 0.2V (Pre out)
Speaker load impedance: 8Ω (minimum)
Digital inputs: coaxial, optical
Video Connections: HDMI, component, composite, SVHS
Dimensions: 440 x 168 x 397mm
Weight: 18kg
Accessories: remote control
Year: 2007
90 Day Warranty
$995.00
Pioneer QX-949A

Specifications
The QX-949 is Pioneer’s ultimate four channel FM/MW stereo receiver, featuring all present quadraphonic systems, CD-4, SQ and regular matrix.
The unique power boosting circuit converts the large 4-channel power output to even greater 2-channel power.
Other features include 3 pairs of tape terminals, 4 pairs of speaker systems, 2 pairs of phono terminals, high and low filters and a Dolby NR adapter switch.
Specifications
Tuning range: FM, MW
Power output: 60W/ch (stereo), 40W/ch into 8Ω (quadraphonic)
Frequency response: 7Hz to 25kHz
Total harmonic distortion: 0.3%
Damping factor: 35
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 70dB (MM), 90dB (line)
Output: 150mV (line)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 14 x FET, 7 x IC, 118 x transistors, 69 x diodes
Dimensions: 550 x 160 x 440mm
Weight: 22.4kg
Year: 1974
90 Day Warranty
Alignment, Serviced.
$1995.00
Marantz 2220B

Stereophonic Receiver (1972-74)
Tuning range: FM, MW
Power output: 20 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 50kHz
Total harmonic distortion: 0.9%
Signal to noise ratio: 77dB (line)
Channel separation: 35dB (line)
Speaker load impedance: 4Ω to 16Ω
Weight: 26.4lbs
90 Day Warranty
$995.00
Akai GX270D-SS

Specifications
Track system: 4-track, 2-channel, stereo/monaural system
Heads: 1 x GX playback, 1 x GX record, 2 x erase
Motor: 2 x reel, 1 x capstan
Reel size: up to 7-inch reel
Tape speeds: 3 3⁄4 7 1⁄2 IPS
Frequency response: 30Hz to 21kHz (7 1⁄2 IPS)
Signal to Noise Ratio: 54dB
Total harmonic distortion: 1%
Weight: 17.8kg
90 Day Warranty
$1495.00
Sony TC-WR701ES

Specifications
Type: auto reverse, double compact cassette deck
Track System: 4-track, 2-channel stereo
Tape Speed: 4.8, 9.6 cm/s
Heads: 2 x record/playback/erase
Motor: 2 x reel, 2 x capstan
Tape Type: type I, CrO2, Metal
Noise Reduction: B, C, S
Headroom Extension: HX Pro
Frequency Response: 30Hz to 19kHz (Metal tape)
Signal to Noise Ratio: 82dB (dolby S)
Wow and Flutter: 0.07%
Total Harmonic Distortion: 1.8%
Input: 160mV (line)
Output: 0.5V (line)
Dimensions: 430 x 135 x 295mm
Weight: 4.8kg
Year: 1993
$495.00
Sony TC-WE305

Specifications
Type: double compact cassette deck
Track System: 4-track, 2-channel stereo
Tape Speed: 4.8 cm/s
Heads: 1 x record/playback, 1 x playback, 1 x erase
Motor: 2 x DC servo
Tape Type: type I, CrO2, Metal
Noise Reduction: B
Frequency Response: 30Hz to 15kHz (Metal tape)
Signal to Noise Ratio: 63dB (dolby B)
Wow and Flutter: 0.15%
Total Harmonic Distortion: 1.8%
Input: 160mV (line)
Output: 0.5V (line)
Dimensions: 430 x 120 x 305mm
Weight: 3.3kg
Year: 1996
90 Day Warranty
Alignment, Serviced.
$395.00
Akai GX-77

Specifications
Track system: auto reverse, 4-track, 2-channel, stereo system
Heads: 2 x GX record, 2 x GX playback, 2 x erase
Motor: 2 x reel drive, 1 x capstan
Reel size: up to 7 inch reel
Tape speeds: 3 3⁄4 7 1⁄2 ips
Wow and flutter: 0.03% (7 1⁄2 ips)
Frequency response: 25Hz to 33kHz (7 1⁄2 ips)
Signal to Noise Ratio: 63dB
Total harmonic distortion: 0.5%
Input: 70mV (line), 2mV (DIN)
Output: 0.775V (line), 0.3V (DIN)
Dimensions: 440 x 244 x 227mm
Weight: 17kg
90 Day Warranty
Alignment, Serviced.
$1495.00
Akai GX-F95

Specifications
Type: 3-head, single compact cassette deck
Track System: 4-track, 2-channel stereo
Tape Speed: 4.76 cm/s
Heads: 1 x record, 1 x playback, 1 x erase
Motor: 1 x reel, 1 x capstan, 1 x door
Tape Type: type I, CrO2, Metal
Noise Reduction: B
Frequency Response: 20Hz to 21kHz (Metal tape)
Signal to Noise Ratio: 72dB (dolby B)
Wow and Flutter: 0.028%
Total Harmonic Distortion: 0.6%
Input: 70mV (line), 0.25mV (mic)
Output: 0.41V (line)
Dimensions: 440 x 164 x 364mm
Weight: 12.5kg
90 Day Warranty
Alignment, Serviced.
$995.00
Sansui 8080

Specifications
The Sansui 8080 is an FM/AM stereo receiver with all the same sophisticated circuitry as the 9090, but with 80 watts per channel, minimum RMS, 1000Hz both channels driven and dazzling 0.2 % total harmonic distortion (at rated output).
Features include four meters : twin power meters ; signal strength ; tuning, MOS FET FM front-end for higher sensitivity, clear reception under any transmission conditions, improved stereo reception from FM broadcast and a full range of convenient controls and system connections.
Tuning range: FM, MW
Power output: 80 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 30kHz
Total harmonic distortion: 0.2%
Damping factor: 10
Input sensitivity: 2.5mV (MM), 100mV (DIN), 100mV (line)
Signal to noise ratio: 70dB (MM), 80dB (DIN), 80dB (line)
Channel separation: 50dB (MM), 50dB (line)
Output: 100mV (line), 30mV (DIN), 0.75V (Pre out)
Dimensions: 540 x 182 x 397mm
Weight: 20.9kg
Year: 1975
90 Day Warranty
Alignment, Serviced.
$1995.00
Kyocera DA-310CX

The Kyocera DA-610cx remote control compact disc player features a Zirconia Ceramic track for the laser pickup mechanism, an extremely smooth and durable surface for maximizing freedom of laser head movement. Four non resonant Fine Ceramic supports are used, contributing to the reduction of harmful vibration. The Multi-function display indicates the various and detailed mode information. The three-laser-beam tracking system keeps the laser beam on track, the center beam reading the music and the other two beams monitoring and correct for mistracking.
Specifications
Disc format: CD
Digital converter: CX20152, 16-bit
CD Mechanism: KSS-121A
Frequency response: 5Hz to 20kHz
Dynamic range: 90dB
Signal to Noise Ratio: 90dB
Channel separation: 90dB
Total harmonic distortion: 0.0005%
Year: 1987
$295.00
DBX BX3

Description
Incorporating four independent power amps, the BX-3 functions as a stereo amplifier, a 3-channel amplifier or a 4-channel amplifier, and up to four pairs of speaker systems can be driven at a time.
Specifications
Power output: 180 watts per channel into 8Ω (stereo), 550 watts into 8Ω (mono)
Frequency response: 1Hz to 200kHz
Total harmonic distortion: 0.003%
Damping factor: 50
Input sensitivity: 1.2V
Signal to noise ratio: 115dB
Speaker load impedance: 2Ω to 16Ω
Dimensions: 18.75 x 5.75 x 16 inches
Weight: 46.4lbs
Year: 1986
$495.00
Sony STR-DA80ES

Specifications
Tuning range: FM, MW
Power output: 100 watts per channel into 8Ω (stereo)
Surround output: 100W (front), 100W (center), 100W (rear)
Frequency response: 10Hz to 50kHz
Total harmonic distortion: 0.05%
Input sensitivity: 2.5mV (MM), 200mV (line)
Signal to noise ratio: 75dB (MM), 82dB (line)
Output: 200mV (line)
Speaker load impedance: 4Ω to 16Ω
Digital inputs: coaxial, optical
Video Connections: composite, SVHS
Weight: 15.9kg
Accessories: remote control
Year: 1997
$495.00
McIntosh C26

Specifications
The McIntosh C26 is a glass-fronted pre-amplifier featuring two phono, one tuner and one auxiliary input, and two tape loops.
Specifications
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.1%
Gain: 62dB (MM), 20dB (line)
Input sensitivity: 2mV (MM), 250mV (line)
Signal-to-noise ratio: 74dB (MM), 85dB (line)
Output: 250mV (line), 2.5V (Pre out)
Semiconductors: 18 x transistors, 3 x diodes
Dimensions: 406.4 x 138.1 x 330mm
Weight: 14.97kg
Finish: anodized gold and black
Year: 1968
90 Day Warranty
LED Lights, Alignment, Serviced. Wood Case
$3995.00
Rotel RA-1070

Specifications
Power output: 100 watts per channel into 8Ω (stereo)
Frequency response: 4Hz to 100kHz
Total harmonic distortion: 0.03%
Damping factor: 400
Input sensitivity: 1.2mV (MM), 150mV (line)
Signal to noise ratio: 70dB (MM), 102dB (line)
Output: 1V (Pre out)
Dimensions: 430 x 121 x 360mm
Weight: 10.3kg
90 Day Warranty
Alignment, Serviced
$595.00
Realistic SA-2001

Specifications
Power output: 60 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.05%
Input sensitivity: 3mV (MM), 200mV (line)
Signal to noise ratio: 65dB (MM), 85dB (line)
Channel separation: 50dB (line)
Output: 200mV (line)
Speaker load impedance: 4Ω to 16Ω
90 Day Warranty
Alignment, Serviced.
$495.00
MCINTOSH MC7100
Specifications
Power output: 100 watts per channel into 8Ω (stereo), 300 watts into 8Ω (mono)
Frequency response: 10Hz to 100kHz
Total harmonic distortion: 0.005%
Damping factor: 200
Input sensitivity: 1.4V
Signal to noise ratio: 95dB
Speaker load impedance: 4Ω to 8Ω
Dimensions: 445 x 90 x 419mm
Weight: 11kg
Year: 1992
90 Day Warranty
Alignment, Serviced.
$1995.00
McIntosh MC2505

Description
The McIntosh MC2505 is a solid state power amplifier with a maximum power output of 100 watts RMS continuous, 50 watts per channel operating simultaneously, into 4 ohm, 8 ohm, or 16 ohm loads.
Harmonic distortion is less than 0.25% at rated power output from 20Hz to 20,000Hz.
Frequency range at rated output both channels; +0, 0.025dB, 20Hz through 20,000Hz.
Specifications
Power output: 50 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.25%
Damping factor: 10
Input sensitivity: 0.5V
Signal-to-noise ratio: 90dB
Speaker load impedance: 4Ω to 16Ω
90 Day Warranty
LED Lights, Alignment, Serviced.
$2995.00
Carver TFM-22

Specifications
Power output: 225 watts per channel into 8Ω (stereo), 350 watts into 8Ω (mono)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.5%
Input sensitivity: 1.5V
Signal to noise ratio: 100dB
Speaker load impedance: 4Ω (minimum)
Dimensions: 4.7 x 19 x 14.3 inches
Weight: 26lbs
Year: 1989
$995.00
Sony cdp-CX450

Specifications
Disc format: CD (400 disc multi play)
CD Mechanism: KSS-213BFN
Frequency response: 2Hz to 20kHz
Dynamic range: 93dB
Total harmonic distortion: 0.0045%
Line output: 2V
Digital outputs: optical
Dimensions: 430 x 189 x 537mm
Weight: 8.8kg
Accessories: remote commander
Year: 2000
Year: 1989
$495.00
Audio Research SP16
90 Day Warranty
Alignment, Serviced.
$1995.00
harman/kardon 330B

Specifications
Tuning range: FM, MW
Power output: 20 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.5%
Damping factor: 30
Input sensitivity: 3.3mV (MM), 200mV (line)
Signal to noise ratio: 55dB (MM), 60dB (line)
Dimensions: 387 x 330 x 114mm
Weight: 9.45kg
Year: 1974
90 Day Warranty
Alignment, Serviced.
Wood Case
$495.00